Bitumen & Lubricants
Base Oils — SN150 / SN500 / SN600
Institutional procurement profile for Base Oils — SN150 / SN500 / SN600, structured around technical specification, compliance documentation, safe handling and international logistics.
Chemical, physical & logistics data
Procurement specification and compliance grid
Values shown are procurement reference points, not a substitute for the contracted producer specification, current SDS or batch CoA.
| Penetration Grade / Performance Classification | Group I solvent-neutral base oils SN150 / SN500 / SN600, or agreed equivalent |
|---|---|
| Kinematic Viscosity at 40°C | Indicative: SN150 ~28–35 cSt; SN500 ~90–110 cSt; SN600 ~110–130 cSt — refinery CoA governs |
| Kinematic Viscosity at 100°C | Indicative: SN150 ~4.8–5.8 cSt; SN500 ~10–12 cSt; SN600 ~11.5–13.5 cSt — CoA governs |
| Viscosity Index | Typically around 90–100+ for Group I grades; exact VI by refinery batch |
| Flash Point / Softening Point | Flash point commonly >200°C and increases with viscosity grade; exact CoA / SDS governs |
| OEM Performance Approvals | Base oils do not generally carry finished-lubricant OEM approvals; refinery specification and downstream formulation approval govern |
| Handling / Heating Requirements | Bulk vessel / ISO tank / flexitank where approved, IBC or drum; keep dry and segregated by grade |
| Available Incoterms | FOB / CFR / CIF; FCA / DAP subject to product, package and route |
Technical application & industrial end-uses
Application context for procurement and compliance teams
Base Oils — SN150 / SN500 / SN600 is structured for institutional procurement where specification control, batch traceability, safety documentation and logistics discipline are as important as commercial price. The material is commonly evaluated for base oils SN150, SN500 and SN600 for lubricant blending, process oils and industrial formulations requiring documented viscosity and refinery batch quality. Procurement teams should define the target grade, required purity or performance class, total metric tonnage or liquid volume, loading mode, destination country, discharge port and required delivery window before commercial comparison. For buyers searching for bulk base oil SN150 SN500 SN600 supplier for lubricant blending, AL BASAM coordinates sourcing against producer documentation, current SDS/MSDS, Certificate of Analysis and shipment-specific quality evidence rather than generic catalogue claims. Where dangerous-goods or heated-product controls apply, the transport classification, tank suitability, vessel acceptance, temperature limits, contamination controls and port rules are reviewed before shipment planning. Commercial terms may be structured around FOB, CFR, CIF or another agreed Incoterm, subject to origin and logistics feasibility. Final acceptance always follows the signed contract, approved technical specification, producer CoA, inspection scope and destination regulatory requirements.
Legal, safety & quality documentation
Shipment documentation suite
The exact document set is fixed in the commercial contract and inspection plan. The institutional shipment file may include:
- Current Safety Data Sheet (SDS/MSDS) aligned with GHS classification and destination-language requirements where applicable.
- Independent third-party laboratory / inspection certificate from SGS, Saybolt, Intertek or another mutually agreed inspector when contracted.
- Producer / refinery / chemical-plant Certificate of Analysis (CoA) traceable to the supplied batch, tank, lot or cargo.
- Certificate of Origin plus commercial invoice, packing / quantity documents and certified Bill of Lading or transport document.
- Tanker / vessel / ISO-tank cleanliness or previous-cargo evidence when the product and loading mode require contamination control.
- Trade-control, sanctions-screening, customs and destination compliance documents required by the transaction and applicable law.
Contextual B2B trade inquiry
Request institutional supply terms for Base Oils — SN150 / SN500 / SN600
Provide the commercial and compliance parameters needed to qualify a supply route. Do not enter bank account numbers, passwords or confidential access credentials.
Commercial values shown on this page are procurement guidance. The signed contract, approved specification, current SDS and producer batch CoA govern the transaction.